Ta da...

It's surprising what you can do with a little bit of imagination and creativity!

It helps if you can find what you need for nothing or very little spending and I found both!

I bought the pine bedside off eBay for $20 and the hardwood dining suite was given to me by our lovely neighbours who was selling it on eBay to which no-one had bid for.

And he cut it to size for me since he's a builder and has all the tools...woohoo!

Because the wall that I wanted it to go on was 3300mm and the table being 1900mm x 1000mm, cutting it down the centre to give 2 halves (width now 500mm each) would've been too long, so he took 250mm off the end to make the 2 halves at 1650mm x 500mm each which was perfect as the bedside would be the support for the centre.

Since there wasn't going to be anything heavy on the desks, I felt that there was no need to put any battens on the back wall however, I put a batten on each end to keep it stable

By the time I got around to sanding it last Thursday, I finished it completely by Saturday afternoon and I think it's turned out pretty damn good considering I had no help!

It took a lot of elbow grease I have to admit, and quite a few sanding discs too...phew!

But I'm flabbergasted by how much more room it gives me and how it makes the room look sooooooo much bigger now!

Oh, and I had to pop on some 40mm round timber feet on the bedside to raise the height that the table would've been with the legs on 

I also scavenged around my neighbourhood for some timber (saves me buying it) that I could use as a batten to fix the top to the side walls, a very accommodating tradie allowed me to hunt in his rubbish pile to find the right one...a 1metre piece of 4x2...purrrrrfect!

I cut that at 450mm x 2 and fixed them to the walls using (3) toggle bolts in each as the studs didn't line up

I had to cut a piece out (on either side) of the decorative top on the drawers (using a jig-saw) to allow me to fit the facing on as i didn't want any gaps

I also cut a hole for all the cords in the top with a hole saw and placed plastic cover on it

I'm really happy with the colour of the stain and it matches up perfectly with the buffet that I bought off eBay a couple of weeks back see here

After putting it all together on Sunday, I went and done a little decor shopping and seen these frames at K-Mart for $6 ea and bought some wooden letters (x & o) from Spotlight too and just painted them black and white and hot glued them to the (painted) backing of the frame

I printed off a nice saying that I've always loved..."If you can dream it, you can do it" how fitting is that saying?

I printed off black and white stripes to put in this one














I also bought some floating shelves from Bunnings @ $21 ea

So here is a reminder of what the room looked like before...

looks pretty small and somewhat compacted hey?

So the end tally for my new home office is...

Table - $0
Bedside drawer - $20
Buffet - $50
Floating shelves x2 - $42
Orbital sander - $79
Frames - $24
Material - $10
Wooden lettering - $13.50
Toggle bolts - $9
Timber batten - $0
Timber feet - $20
Elbow grease - priceless!

Bal = $267.50
Less sale of old desk - $250

Total cost = $17.50

The prep...

I'll let the pictures tell the story.

Boy what a job it was rubbing these back! It probably took me longer than it should've but I'm happy with the job done so far.

I know I probably should've used paint stripper (to make it easier), but I just couldn't wait to finally get started and the last thing I wanted to do was wonder around Bunnings for 3 or so hours like always!

As it turned out I had to after my once faithful sander gave up on me after sanding back the drawers of the bedside table....bummer!

So only spending about 45 mins (I'm so indecisive), I ended up buying a new one in the form of a Ryobi orbital sander ($79) complete with 8 spare discs ranging from 60-240 grit, a dust filter and a bag...woohoo a new toy!

I felt like a kid in a candy shop when I got to the counter

So after getting back home and completing my first mission of taking it all back to bare timber, I was finally ready to give it all its first coat of Black Japan stain

I let the first coat seep through and had to let it dry for a couple of hours

Completing the second coat this afternoon on the first half of the desk and bedside, as much as I love how it looks, I'm worried that it maybe just a little too dark so I'm going to let this dry overnight and see how it is once I sand it back a little to prep it for the wax and buff

As fate would have it!

Well after cutting up my table on Saturday to make my dual desk for the home office, I would have to say that I'm quite pleased.

Once I get to sanding it all down, it shouldn't take too much longer to have the office finally up and running.

I found a bedside table to use as a support for the desk in the centre and use the drawers for my stationary on eBay that was ending soon and later that night, I noticed that the seller had another 2 bedsides (the same) for sale as well!

Since the bedside was only $20 (starting bid price), I sent the seller a message to say that I would like to buy all three and if she would take $50 for them.

She replied later saying that she would consider the offer since no-one had started the bid (on eBay) and she would get back to me when she finished work.

The auction finished jest before midday on Sunday and no-one had bidded...phew!

So I sent another message to say that I still wanted to buy the items and she replied that she was only going to sell one as her daughter had changed her mind about the other 2...bummer!

I still wanted the one so I replied and said ok I'll just have the one.

She rang me on Monday morning to say that she would drop it in to me on her way to work! I was quite happy to go and pick it up (only half hr away) at her convenience, but when she offered to drop it in to me, I took it.

I've got a big job ahead of me with all the sanding back and re-staining, but that's the good 'ol D.I.Y for ya.

I'm guessing I'll have it done in a couple of weeks give a day or two hehe.

So so far, the tally for my office spend is:

$50 - sideboard (eBay)
$20 - Bedside table (eBay) free delivery!
$0 - Dining table & chairs (eBay) free delivery!

Finally taking shape

Well I'm slowly getting my home office in order. I've sold my old desk and bookcase for the asking price of $250.

I did advertise it on eBay however it didn't sell although I had a couple of watchers and well over 100 views so it re advertised the next week automatically.

Whilst I hesitated at first, I decided to drop the price (just to get rid of it) to $125 to which I got more watchers this time but less views...bizarre!

So when it (again) didn't sell, I advertised it on a local buy and sell site where I put the original price on it of $250.00 and sold it within 20minutes of advertising...bizarre!

So now that I have a blank canvas once again, it's a lot easier to get the room organised for what I want to do

Over the prior weeks to writing this post, I've come up with the idea of buying a timber dining table wide enough for me to slice down the centre to give me (2) halves which I'll turn into a double desk...simple!

So during the 2 weeks that I was selling my old desk, I was watching a few dining tables suitable to my needs on eBay however, I wasn't prepared to pay more than what they ended up going for so I was left feeling that this may not be the way to go!

That was until the other day!...keep reading your gunna love this!

The Mysteriously Missing Sky Panel...

I rang John (the sales consultant) from ScreenScience yesterday and told him that we were missing a panel with our order. He in fact couldn't apologise enough and said that he'll look into it when he gets back into the office.

A couple of hours later, he rang with some good news.

Whilst he couldn't find (probably missed out on getting made) our missing panel which was a mystery to him, he said that when he go back into the office, he went through our plan (sketch) and although it was numbered 1 through to 15, he couldn't work out why the number 2 panel wasn't packed with the rest.

I told him that the number 2 panel that we did have, was obviously marked wrong as this had the hole to be cut out for the air vent which should be panel 3.

After apologising again for the mishap, he said that he will have one made asap and hopes to have it couriered to us either today or tomorrow at the very latest...woohoo!

It's just one of those unfortunate things I guess, an honest mistake and I'm happy that they'll have it rectified so quickly.

So now, we can get on with the installation (on the weekend) and finally have our cinema finished.

So until then...have an awesome week lovely people

D.I why?

Because it's fun, it saves you a heck of a lot of money, it'll be a one off and well...why not!

Since I'm all about saving money (and really, who isn't these days?), I want to spruce up the spare room to make it a little more cosy and give it a different look all together.

One thing I loooooove about up-cycling is that it makes it a one off item instead of something that everyone else has and it's so affordable.

I've spent many a "DIY" time in the shed sanding back old paint or varnish on numerous goodies that I've collected over the years and I looooove it.

I'm starting off with the 2 side tables just to give them a much needed lift from the "drab" state they're in at the moment.

drab 1 |drab|adjective (drabber, drabbest)1 lacking brightness or interest; drearily dull: the landscape was drab and grey | her drabsuburban existence.2 of a dull light brown colour: drab camouflage uniforms.

I remember giving these a makeover (re-paint) about a decade ago so it's time for new makeover

check out 2 of the dictionary description of the word drab...mmmm

Since they're only made of MDF, it's not like I have to spend hours stripping back the paint and sanding until smooth, so that's less time I have to spend in the shed!

There's so many options I could go for here, namely just a new coat of paint and some new handles might just do the trick and keep the costs low....but

that's just not me, I'm going to turn these babies into something that looks like it cost an arm and a leg ...hopefully :)

So keep watching

Btw....I'd love it if you would tell me what you would do to update them (maybe your ideas will be better), so don't be shy make a comment below and if I use your idea...I will give you kudos!

Gold Class Cinema...part 2

(1)

We (finally) received our star panels on Thursday, and of course I wanted to open the boxes right there and then but I waited until Geoff got home that night so we could open the box together...ohhhhh how exciting!